Accessories For SR 500/SR 500 EX/SR
Tyvek© hood SR 586
The SR 586 protective hood is designed for use together with SR 520/SR 530 Hoods or SR 580 Helmet with visor, combined with a fan or the SR 507 compressed air attachment. It protects against dust and particles as well as minor amount of splashing and dripping.
The SR 586 is made of Tyvek© and can be used in all situations where the SR 520, SR 530 or SR 580 can be used. However, it does not protect against toxic, corrosive or irritating vapours or aerosols.
The hood is intended for short-term use and is not suitable for cleaning.
Art. no. T06-0806
Breathing hose SR 550/SR 551
SR 550, breathing hose PU for connection to full face mask SR 200.
Art. no. T01-1216
EX-approved
SR 551, breathing hose rubber for connection to full face mask SR 200.
Art. no. T01-1218
EX-approved
Bag SR 505
Practical grip bag for the SR 500 system with two separate major compartments. Space for the SR 500 powered unit, accessories and chosen face-piece.
Art. no. T06-0102
Belt SR 503/SR 504/SR 553
Leather belt SR 503
Art. no. T06-0103
Rubber belt SR 504
Art. no. T06-0104
Heavy Duty belt SR 553
Art. no. T06-0119 Standard
Art. no. T06-0120 Large
Charging station SR 506/SR 516
For charging 1-5 batteries of the Sundström SR 500 fan.
(Not SR 500 EX)
The SR 506 is delivered in unassembled condition och kan efter behov fyllas på med 1 - 5 laddare.
The SR 516 is delivered with 5 chargers type 2541 mounted.
The charger senses the battery condition and provides optimum charging conditions, with the shortest possible charging time.
The earlier type 9940 charger model does not have this function and should not be used as the charge base. The model number is marked on the rear of the charger.
Art. no. T06-0108 - SR 506
Art. no. T06-0111 - SR 516
Belt SR 503 EX/SR 504 EX
SR 503 EX - Leather belt for SR 500 EX
Art.no: T06-2149
SR 504 EX - Rubber belt for SR 500 EX
Art.no: T06-2150
Battery SR 502 HD
HD, Heavy Duty, 14.8 V, 3.6 Ah, lithium-ion.
The charging time for the HD battery is about 2 h.
Art. no. T06-0101HD, Heavy Duty, 14.8 V, 3.6 Ah, lithium-ion.
The charging time for the HD battery is about 2 h.
Art. no. T06-0101
Face seal SR 546
SR 546, face seal in textile for SR 540.
Art. no. T06-0504
Splash cover SR 514
Splash cover (PVC) to SR 500 protects the fan unit from liquid splashes and dust.
Art. no. T06-0114
Head cover SR 543
Head cover SR 543 is an accessory for shield SR 540. It protects the top of the head and neck against solid and liquid flying particles.
Art. no. T06-0505
Protective film for SR 540/SR 520/SR 530/SR 580
SR 542 - Protective film for SR 540
Art. no. T06-0501
SR 522 - Protective film for SR 520/SR 530
Art.no. T06-0201
SR 582 - Protective film for SR 580
Art.no. T06-0801
Visor set SR 545 PETG
Visor set PET glass with covers for SR 540.
Art. no. T06-0502
EX-approved
Pre filter holder SR 509
Pre filter holder for decontamination enables vacuum cleaning of the pre-filter when rapidly clogged.
Art. no. T06-0105
Steel net disc SR 336
SR 336, a disc punched out of stainless steel mesh. The disc is fitted at the bottom of the pre-filter holder of the mask and protects the filters against sparks and spatter that occurs during welding, flame cutting, grinding and similar work.
Art. no. T01-2001
Harness SR 552
The fan unit can be worn in the lower back or between the shoulder blades.
The plate on the back has 3 size adjustments.
Art. no. T06-0116
Comfort band for SR 580
Comfort band (neck) for helmet with visor SR 580
Art. no. T06-0803
Welding hose protection SR 59021
Welding hose protection SR 59021 for Welding shield SR 590/SR 584
Art. no: T06-4016
Sweatband/Crown band for
Sweatband/Crown band in terry suitable for:
Shield SR 540
Compressed air hood SR 63-10
Art. no. T06-0506
Neck cover, welding SR 59020
Welding neck cover SR 59020 for welding shield SR 590
Art. no. T06-4015
Welding protection SR 585
Welding protection for SR 580/SR 584 Helmet with visor/Welding shield
Art. no: T06-8011
Welding hood SR 59018
Protective hood SR 59018 for welding shield SR 590/Welding shield SR 584
Art. no. T06-4014
Automatic welding lens EN 3/10
Automatic welding lens EN 3/10 for Welding shield SR 590/Welding shield SR 584
Art. no. T06-4007
Automatic welding lens EN 4/9-13
Automatic welding lens EN 4/9-13 for Welding shield SR 590/Welding shield SR 584
Art. no: T06-4009
Automatic welding lens EN 3/11
Automatic welding lens EN 3/11 for Welding shield SR 590/Welding shield SR 584
Art. no: T06-4008
Welding lenses for SR 590/SR 584
Welding lenses for Welding shield SR 590/Welding shield SR 584
Correction lenses for SR 590/SR 584

Face Pieces for SR 500
Gold-plated shield SR 587 and Shields SR 588, 2/3 for Helmet with visor SR 580
In addition to breathing and head protection, this equipment also protects the eyes and face against heat radiation when performing cutting and lighter welding jobs. With the visor in the raised position, the helmet’s large clear visor may be used as face protection when clearing cinders and grinding.
Face seal made of flame-retardant material.
Large selection of accessories including flame-retardant hoods, neck and chest protection.
Art no H06-8510 - SR 587/SR580
Art no H06-8610 - SR 588-1/SR 580
Art no H06-8710 - SR 588-2/SR 580
Hood SR 520
A lightweight hood which covers the face and head.
Available in two sizes, S/M and M/L. Visor of chemicalresistant CA.
SR 520 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
Together with SR 500 EX:
EX-klass: II 2 G EEx ib IIB T3.
EX-klass: II 2 D Ex ibD 21 T195ºC.
The Compressed air attachment SR 507 can be connected.
Art.no. H06-0212 - SR 520 M/L
Art.no. H06-0312 - SR 520 S/M
Hood SR 530
Similar to SR 520 but also protects the neck and shoulders.
One size fits all face shapes. Visor of chemical-resistant CA.
SR 530 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
Together with SR 500 EX:
EX-klass: II 2 G EEx ib IIB T3.
EX-klass: II 2 D Ex ibD 21 T195ºC.
The Compressed air attachment SR 507 can be connected.
Art.no. H06-0412 - SR 530
Protective helmet with visor SR 580
The SR 580 provides complete protection when respiration, face and head protection is required and can be easily combined with the majority of ear defenders.
Helmet in PE-HD.
Polycarbonate visor, easy to rise with a large field of view.
SR 580 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
The Compressed air attachment can be connected.
Together with SR 500 EX:
EX-klass: II 2 G Ex ib IIA T3
EX-klass: II 2 D Ex ibD 21 T195 °C
Art. no. H06-8012
Shield SR 540
The visor can be easily flipped up to a good balanced "over the head" position.
Simply replaceable visor of PC or alternatively PETG.
The high protection factor enables the face shield to be used in work situations that have not been possible before.
SR 540 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
The Compressed air attachment SR 507 can be connected.
Art.no. H06-0512 SR 540
Shield SR 540 EX
The face shield can be easily flipped up to a good balanced over the head position. Simply replaceable visor of PC or alternatively PETG.
SR 540 EX is approved together with fan unit SR 500 EX in class TH3 according to EN 12941:1998.
Nominal protection factor 500
Together with SR 500 EX:
EX-klass: II 2 G EEx ib IIA T3.
EX-klass: II 2 D Ex ibD 21 T195ºC.
Art. no. H06-6012 SR 540 EX
Hood SR 561
A lightweight hood which protects head and shoulders.
Replaceable hood of Tyvek with an easily adjustable head harness. Easily adjustable and comfortable neck seal of cotton. Visor of PETG.
SR 561 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
Together with SR 500 EX:
EX-klass: II 2 G EEx ib IIB T3.
EX-klass II 2 D Ex ibD 21 T195ºC.
The Compressed air attachment SR 507 can be connected.
Art. no. H06-5012 - SR 530
SR 584 shield/SR 580
SR 584 is mounted on the Helmet with visor SR 580 and gives the user not only head and respiratory protection but also protects the eyes and face when welding.
With the cartridge in the raised position, the helmet’s large and clear visor acts as face protection for grinding work and similar jobs while preserving respiratory protection at all times.
Supplied with a passive welding lens with shade number 10 and 90 x 110 mm in size. Three different automatic lenses are available.
SR 584 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor: 500
The Compressed air attachment SR 507 can be connected.
Art.no: H06-8310 - SR 580/SR 584
Welding shield SR 590
SR 590 welding shield protects against inhalation of harmful and irritating air contaminants as well as against radiation and splashes, for instance, when arc welding, MIG, MAG, and TIG welding, and plasma cutting.
When the front piece is raised, the shield can also be used as protection during grinding and slagging.
The comfortable head harness is fully adjustable and is equipped with spring hooks for mounting of ear muffs.
The SR 590 is supplied with a welding lens with shade number 10 with dimension of 90x110 mm.
Three different types of automatic welding lenses are available.
is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
The Compressed air attachment SR 507 can be connected.
Art. no H06-4012 - SR 590
Hood SR 562
A lightweight hood which covers the face and head, available in one size. Replaceable hood of Tyvek with an easily adjustable head harness. Easily adjustable and comfortable face seal in polyamide/lycra.
Visor of PETG.
SR 562 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998.
Nominal protection factor 500
Together with SR 500 EX:
EX-klass: II 2 G EEx ib IIB T3.
EX-klass II 2 D Ex ibD 21 T195ºC.
The Compressed air attachment SR 507 can be connected.
Art. no. H06-5112 - SR 562
SR 200 + SR 550/SR 551
This combination gives the highest level of protection attainable using filter protection.
Hose SR 550 PU/SR 551 Rubber for connection to Sundström Full face mask SR 200.
Full face mask SR 200 is approved together with Sundström fan units in class TM3 according to EN 12942:1998.
Nominal protection factor 2000
1) SR 200 with. PC visor:
EX-class: II 2 G EEx ib IIA T3.
EX-class: II 2 D Ex ibD 21 T195ºC.
2) SR 200 with glass visor:
EX-class: II 2 G EEx ib IIB T3.
EX-class: II 2 D Ex ibD 21 T195ºC.
Art.no. T01-1216 - SR 550 PU
Art.no. T01-1218 - SR 551 Rubber
Fan units SR 500 / SR 500 EX / SR 700
Fan unit SR 500
The SR 500 is a battery-powered fan unit that, together with filters and an approved human interface, is included in the Sundström fan-assisted respiratory protective device systems.
The SR 500 can be used as an alternative to filter respirators in all situations for which these are recommended. This applies particularly to work that is hard, warm or of long-duration.